 |
|
iLD Big Display
from $795
The award-winning iSeries meters and controllers now features a new BIG Display. Like all iSeries meters, the new BIG Display can be programmed to change colors between RED, AMBER, and GREEN at any set point or alarm point. For example, the instrument can be programmed to display the process value in GREEN during warm-up, switching to AMBER to signal the normal operating range, and in RED to signal an alarm condition. The changes in color are quickly seen from a distance, and equipment operators can intuitively react to changing conditions. The colors can be programmed to change back when the value drops back below the alarm point or to "latch" on until being reset by the operator. The instrument can also be programmed to display only one unchanging color: GREEN, AMBER, or RED. This is a useful way to let an operator identify, at a glance, process values in three separate locations, or to display three different measurements such as Temperature, Pressure, and Flow.
The BIG Displays can handle a wide variety of signal inputs directly from transducers or process transmitters as well as display data transmitted from other NEWPORT devices via Serial Communications or Ethernet. The "Universal Temperature+Process BIG Display" is designed for Thermocouples, RTD's, and Process (DC) Voltage or Current. It handles TEN (10) thermocouple types: K, J, T, E, R, S, B, C, N, & J DIN. It works with a wide selection of RTD's, both Pt. 0.00385 and 0.00392 curves for 100 Ohm, 500 Ohm, and 1000 Ohm and it measures with 2, 3, or 4 wire connections for the highest accuracy. This model also measures process voltage: 0-100 mV, 0-1 Volt, 0-10 Volt ranges and process current, 0-20 mA (4-20 mA) with built-in excitation of 10 Vdc and 24 Vdc standard. The "Universal Strain+Process BIG Display" handles a wide variety of DC voltage and current outputs from all common load cells, pressure transducers, and most any strain gage type of transducer. The meter measures input ranges of 0-100 mV, -100 to 1 V, 0-10 V, 0-20 mA (4-20 mA) with built-in excitation of 5 Vdc and 10 Vdc standard. This model also features Ten (10) Point Linearization enabling accurate measurements from a wide assortment of unique and nonlinear transducers. The "AC BIG Displays" provide accurate isolated measurement of AC Voltage and Current signals. The AC Voltage model can be scaled for ranges from 0-400mVAC through 0-400VAC. The AC Current model covers ranges from 0-10 mA through 0-5 Amps AC. The "Frequency Pulse BIG Display" provides accurate isolated measurement of frequency (from 200 Hz to 50 kHz) and pulse signals (up to 200M pulses full scale) that can be scaled to any engineering units. The "Ethernet BIG Remote Display" and "Serial RS-232 BIG Remote Display" can display data transmitted via an ethernet network or via serial communications from NEWPORT instruments, from a computer, or from other devices which transmit ASCII data via RS-422 or RS-485. These BIG Displays are compatible with virtually all NEWPORT devices that feature serial communications including: iSeries meters and controllers, INFINITY® digital panel meters, MICRO-INFINITY® controllers, iDRX DIN-RAIL mounted signal conditioners, and many more. Control Functions The Universal BIG Displays features a choice of two optional outputs: Form C SPDT (single pole double throw) mechanical relays, Solid State Relays, DC pulse, and/or programmable analog output selectable as either a controlling function or as retransmission of the process value. The Universal BIG Displays can control simple manual operation to ON-OFF and full Autotune PID control. (Selectable preset tune, adaptive tune, PID, PI, PD control modes.) The dual control outputs can be configured for a variety of independent control and alarm applications. The ramp-to-setpoint feature allows the user to define the rate of rise to setpoint, minimizing thermal shock to the load during start-up. Maximum ramp time: 99.59 (HH.MM), Soak: 00.00 to 99.59 (HH.MM), Damping: 1 to 8 in unit steps. Input types: 0 to 20 mA, 0 to 100 mV, 0 to 1 V and 0 to 10 Vdc. For applications that do not require PID control, Universal BIG Displays controllers are available in a special model that offer simplified programming. The Universal BIG Displays “Simplified Menu” model (specify –SM option) offers simplified programming. The menu flowchart is similar to programmable digital panel meters that are used for on/off control or alarms. (Please see the Universal BIG Displays operator’s manuals for programming details.) Analog Output The optional analog output can be programmed within a range of 0-10 Vdc or 0-20 mA. It is selectable as either a control output or as a calibrated retransmission of the process value-a unique feature among controllers. Output Network Options The BIG Displays with Network Options are easy to configure and scale to virtually any engineering units with the push buttons on the front panel, or with a personal computer using the free configuration software and the optional Ethernet connectivity or Serial Communications. The Ethernet option (-C4EI or -EI) allows the device to be connected on a standard Ethernet network and communicates using standard TCP/IP protocol. These Ethernet options also includes RS-485 (and RS-422) Serial Communications. The serial communications option (-C24) includes both RS-232 and RS-485 (and RS-422) on one instrument. It communicates with a straightforward ASCII communications protocol, as well as MODBUS protocol. The serial communication (-C2A) is same as the -C24 option but instead of RS-485 communication it is available with isolated analog output and can be user set for 0 to 10 V, 4 to 20 mA or 0 to 20 mA. Designed and Manufactured in the USA The innovative NEWPORT® iSeries of meters/controllers features an extended Five (5) YEAR warranty at no extra charge. The iSeries packs a wealth of power and features into these BIG Displays, utilizing COB (chip-on-board) and SMT (surface mount technology) assembly techniques and automation. Every iSeries instrument is thoroughly calibrated and tested at several stages throughout production. The iSeries offers the highest accuracy for industrial instrumentation at 0.03% of reading. The analog-to-digital conversion utilizes proprietary 20-bit ASIC (application specific integrated circuit) patented algorithms and smart filtering. Free Software Free software is provided for easy set-up, configuration and data acquisition with the NEWPORT® iSeries. Free Factory Setup and Configuration Make installing your iSeries meter or controller easier by ordering it preconfigured by the factory, at no extra charge. You specify the input types, scaling if applicable, set points, alarm points, etc. and we will program the instruments to your specific requirements in our calibration lab prior to shipment. For a checklist of factory setup parameters, please consult your NEWPORT® applications engineers. SPECIFICATIONS Universal
Temperature & Process Input (Model UTP) Frequency Pulse Input (Model
FP)
Totalize with Reset: Range = 0 to 999999* A-B Totalize (Reset input used as a +A input): Range = -99999 to 999999 (Resolution is 1 count) Quadrature (Reset input used as second input): Range = -99999 to 999999 (Resolution is 1 count) Input Impedance: Input: 1 Mohm to +EXC; Reset: 100K to +5V Isolation: Dielectric strength to 1000 Vrms transient per 1 min. test based on EN 61010 for 50 Vdc or Vrms working voltage Input Over-Voltage Protection: With 1K pull down: 14V; With 3K pull up: 20V; Without pull up/down: 60V Excitation: 5, 8.2 or 12.5V at 25mA, programmable Accuracy at 25°C: ±0.1% of FS Crystal time base accuracy: ± 50 ppm Temperature Stability: ±50 ppm/°C typical; Time base stability: ±1 ppm/°C Step response for RS485 Output: 0.1 second to 99% of the final value (Filter time constant = 0, Gate time = 0.05 Sec)
NETWORK and COMMUNICATION OUTPUTS (Optional -C24, -C4EI, -EI) Ethernet: Standards Compliance IEEE 802.3 10Base-T Supported Protocols: TCP/IP, ARP, HTTPGET RS-232/RS-422/RS-485/MODBUS: Selectable from menu; both ASCII and modbus protocol selectable from menu. Programmable 300 to 19.2 K baud; complete programmable setup capability; program to transmit current display, alarm status, min/max, actual measured input value and status. RS-485: Addressable from 0 to 199 Connection: Screw terminals CONTROL for UTP, SP Action: Reverse (heat) or direct (cool) ALARM 1 & 2 (programmable) Operation: High/low, above/below, band, latch/unlatch, normally open/normally closed and process/deviation; front panel configurations INSULATION Power to Input/Output: 2300 Vac per 1 minute test (RS-232/485, Input or Output) Between Inputs: 500 Vac per 1 minute test GENERAL Power: 100-240 Vac +/-10%, 50/60 Hz 22.5 W Environmental Conditions: 0 to 40°C (32 to 104°F), 90% RH non-condensing Warm up to rated Accuracy: UTP, SP, FP, ACC, ACV = 60 minutes. Protection: NEMA-4 (IP65) front bezel DIMENSIONS 2.25"/4-Digit: 11.75” L x 5.375” W x 2.875” D (289 mm L x 137 mm W x 73 mm D) Weight: 1,360 g (3 lb) 2.25"/6-Digit: 15.50” L x 5.375” W x 2.875” D (394 mm L x 137 mm W x 73 mm D) Weight: 2,040 g (4.5 lb) 4.00"/4-Digit: 18.11” L x 8.31” W x 3.76” D (480 mm L x 211 mm W x 95 mm D) Weight: 2,495 g (5.5 lb) 4.00"/6-Digit: 25.26” L x 8.31” W x 3.76” D (642 mm L x 211 mm W x 95 mm D) Weight: 3,175 g (7.0 lb) iLD - Big Display
 WIRING DIAGRAM iLD Big Display Temperature/Process Controller WIRING - CAD FILES |
|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Accuracy:
0.03% reading
